Mount Magazine, Arkansas
The highest point in Arkansas, at 839 m, a flat-topped mesa in the Ozarks.
Drag to rotate · scroll or pinch to zoom
Make this model
The Standard resolution model is free as STL, 3MF, Colored 3MF, OBJ and a 16-bit heightmap. High resolution samples the place about ten times more finely.
- Region
- Arkansas, USA
- Position
- 35.1667, -93.6444
- Area
- 10 × 10 km
- Real elevation
- 111 to 838 m (726 m of relief)
- Printed size
- 150 mm (5.9 in) wide, about 1:66,700
- Heights
- 2× exaggeration
- Elevation data
- USGS 3D Elevation Program, 1–10 m per point
- Suggested color
- Natural
- Group
- Mountains
About Mount Magazine, Arkansas
Mount Magazine, officially named Magazine Mountain, is the highest point of the U.S. Interior Highlands and the U.S. state of Arkansas, and is the site of Mount Magazine State Park. It is a flat-topped mountain or mesa capped by hard rock and rimmed by precipitous cliffs. There are two summits atop the mountain: Signal Hill, which reaches 2,753 ft (839 m) and Mossback Ridge, which reaches 2,700 ft (823 m). Mount Magazine is often called "the highest point between the Alleghenies and the Rockies" (there are mountains located in the Trans-Pecos region of far-west Texas which exceed Mount Magazine in elevation and prominence, although the Trans-Pecos region lies so far south of the Rockies, that region arguably lies not "between" the Allegheny Mountains and the Rocky Mountains).
From Wikipedia: Mount Magazine, text available under the Creative Commons Attribution-ShareAlike 4.0 license. The article’s history lists its authors.
Questions about Mount Magazine, Arkansas
Where is Mount Magazine?
Mount Magazine is in Arkansas, USA at 35.1667, -93.6444. The model covers a 10 by 10 kilometer square around that point.
How high is the terrain in the Mount Magazine model?
The land in this model runs from 111 to 838 m (726 m of relief). These are the measured heights, printed 2 times taller so the shape is easy to see.
Can I 3D print Mount Magazine?
Yes. Download the free Standard resolution STL and print it on any FDM or resin printer. It is 150 mm wide and about 26.8 mm tall, on a solid 5 mm base, at a scale of about 1:66,700. It also works for CNC carving. Use Customize to change the width, base thickness or height exaggeration, make it round or add a name plate.
How accurate is the Mount Magazine model?
It is built from real elevation measurements, not an artist's guess: the USGS 3D Elevation Program, mostly airborne laser scans at 1 to 10 meters per point. The shaded picture on this page is made from the same data.
Is the Mount Magazine model free?
The Standard resolution model is free as STL, 3MF, Colored 3MF, OBJ and a 16-bit heightmap. High resolution samples the place about ten times more finely and is a paid upgrade.
What is a Mount Magazine terrain model good for?
People use it as a memento of a climb, a gift for a mountaineer or a ski-trip souvenir.
About this terrain model
Embossify Terra builds Mount Magazine, Arkansas from real measured elevation, not an artist's guess. In the United States the heights come from the USGS 3D Elevation Program, mostly airborne laser scans that resolve every 1 to 10 meters.
The model covers a 10 by 10 kilometer square centered on 35.1667, -93.6444. It prints 150 mm (5.9 in) wide on a solid base, a scale of about 1:66,700. The heights are exaggerated 2× so the shape is easy to see and feel; you can change that when you customize the model. The sea is flattened to zero, so land stands on a clean base.
New to terrain printing? Read how Terra works. The shaded picture on this page is made by Embossify from the same elevation data.
