Embossify Lens

A free viewer for STL, 3MF, GLB, PLY and OBJ files and pictures. Rotate, section and measure before you print.

  1. 1Open a fileA 3D model or a picture
  2. 2Look aroundRotate, zoom, section or measure
  3. 3Read every detailSizes, weight, mesh check, file facts

Drop a 3D model or a picture here

3D models up to 100 MB · pictures up to 25 MB

Opens STL, 3MF, GLB, PLY and OBJ models, and JPG, PNG, GIF, WebP, BMP, AVIF and SVG pictures.

Lens

Look at any model from every side

Open a 3D model or a picture and look at it from every angle: change the style, cut it open, measure it and check the mesh before you print.

  • Shaded, wireframe, X-ray
  • Section and measure
  • Check the mesh
One relief shown three ways: shaded, as a wireframe, and sliced open with a measurement
3D modelsSTL, 3MF, GLB, PLY and OBJ, up to 100 MB
PicturesJPG, PNG, GIF, WebP, BMP, AVIF and SVG, up to 25 MB
Free to useNo account and nothing to install

What you can do

Look aroundDrag to rotate, right-drag or Shift-drag to move, and use the wheel or a pinch to zoom. Seven one-tap views (front, back, left, right, top, bottom and angled) and a perspective or flat (orthographic) camera.
Change how it looksShaded, shaded with edges, wireframe, X-ray, normals and a height map. Pick the model color and the background, and turn the grid, axes and a dimensioned box on or off.
Cut it openSlide a section plane through the model along any axis to see inside. The cut is filled in, so you can check wall thickness and hidden cavities.
MeasureClick two points on the surface to get the distance and the difference along each axis. Sizes can be shown in millimeters, centimeters or inches.
Read every detailThe size on each axis, where the center and the center of mass are, surface area and volume, the smallest and largest triangle, how much would need support, and what the file says about itself (format, units, creator, parts). Run the full check to find open edges, non-manifold edges, separate parts and holes, and highlight back faces to catch flipped normals.
Estimate the weightPick a material and an infill to get a rough print weight from the model's volume.
SaveSave a picture of the current view as a PNG, or save the model as a compact binary STL.
Look at pictures tooOpen a picture to zoom and pan it, check whether it is color or black and white, and send it straight to the converter to make an STL.

Shortcuts

KeyDoesKeyDoes
1 to 7Front, back, left, right, top, bottom, angledFFit the model in view
WCycle shaded, edges and wireframePPerspective or orthographic
GGridBBounding box and sizes
AAxesRAuto-rotate
XSection planeMMeasure

Good to know

Lens opens 3D models up to 100 MB and pictures up to 25 MB, which covers nearly everything made for printing or carving. Very large models open slowly on a phone, so use a computer for the biggest ones.

When you are finished, press Clear or just open another file. Anything you save, a picture of the view or a copy of the model, goes to your Downloads folder.

Need an STL to look at?

Press Try a sample to open a random model, or open the Model library to pick one: gears, knots, bowls, a mushroom, a snowman, a calibration cube and more, each ready to open as STL, 3MF, GLB, PLY or OBJ. We made every one of them ourselves and release them CC0 (public domain), so you may print, share and sell them freely. Or make your own from any picture with the image to STL converter, learn what is inside the file in our STL file guide, or open the Studio to tune a model before you print or carve it.

No STL yet?

Turn any picture into one, or take a photo of yourself with Embossify Me. The Standard Resolution file is free.

Convert a picture

Embossify model library

Free models made by Embossify. Open the full library page

Open as